Parker HLR070 Mounting Instructions

Contents

Parker HLR070 Mounting Instructions Manual pdf 12 page image

Introduction HLR Mounting Instruction12 192-510201N1 HLR 2019-041.8 Conditions of utilizationGeneral introductory notesWith this linear actuator, you bought a product which was manufactured and testedbefore delivery with the utmost care.Please take your time to read the following notes which you ought to follow closelyduring setup and operation.The operation of the linear actuator is only permitted within the range of the limitvalues stated in this manual (technical data).Unless, all claims under the warranty will become void and a reduced service lifeor even damages must be expected.Please compare the operating data with the stated limit values especiallywith reference to: Stroke length and setting of the limit switches, those must be set so that there is asufficient safety distance at both ends of the strokeEven if the limit switches were already mounted at our premises, they must beadapted according to suitable values before operation! Velocity Acceleration Loads Process forces Environmental conditions (e.g. temperature, dirt) Please do take possible pulses caused by moved masses into consideration forthe operating data.Note on the installation of the linear actuatorAlways use all available mounting possibilities and respect the requirements.If the motor used with the linear actuator should be able to exceed individual limitvalues, the respective values for the motor must be limited in the control byappropriate parameterization. The parameterization should even be reduced to thevalues necessary for operation.The internal end stops serve as damping element during mechanical collision.However, they can avoid limited damages only.The service life of the linear actuator is strongly dependent on the extent to whichits performance capability is exhausted and whether - even if only for a short periodof time - inadmissible operating states have occurred.