Parker HLR070 Mounting Instructions

Contents

Parker HLR070 Mounting Instructions Manual pdf 8 page image

Introduction HLR Mounting Instruction8 192-510201N1 HLR 2019-041.5 For Safety Use1.5.1. General hazardsGeneral Hazards on Non-Compliance with the Safety InstructionsThe subsystem has been designed in accordance with state-of-the-art technicaldevelopments and is operationally reliable. If it is not operated by qualified or atleast trained personnel or if it is operated improperly or not in accordance with theoperating instructions, however, the unit may bear the risk of hazards.Electronic, moving and rotating components can cause danger for life and limb of the operator or third persons and / or cause material damage.If the linear actuator is installed in a machine plant, the safety requirements notedin the operating instructions for that machine must be combined with thosedescribed in this manual.1.5.2. Identifying Residual Dangers and Hazardous AreasIf there are still residual dangers present to persons or property from the linearactuator in spite of operating it in a safe manner, the user must make reference tothese residual dangers through signs and written rules requiring appropriateprocedures.The following safety signal words are used:Indicates that an imminent hazardous situation may lead to death or seriousbodily harm if not prevented using appropriate safety measures.Indicates a potentially hazardous situation which, if not avoided using appropriatesafety measures, could result in serious or minor injury.Indicates a potentially hazardous situation which, if not avoided using appropriatesafety measures, may result in minor injury or material damage.Provides important information about the product, how to handle the product orabout the part of the manual to which particular attention must be paid.1.5.3. Working safelyThe information (such as instructions and notes) contained in this manual mustbe heeded for all work involved in installing, commissioning, setting up, operating,changing operating conditions and modes, servicing, inspecting and repairing theunit.The manual must be available close to the linear module during the performanceof all tasks.It is impermissible to operate the liner module if it is not in perfectly functionalcondition.Operating personnelOnly qualified expert personnel is permitted to perform works on the linearactuator. All the applicable regulations and provisions must be heeded (IEC, EN,national accident prevention regulations etc.).Qualified persons as the term is used in this manual are persons who: persons who, by virtue to their training, experience and instruction, and theirknowledge of pertinent norms, specifications, accident prevention regulations andoperational relationships, have been authorized by the officer responsible for thesafety of the system to perform the required task and in the process are capableof recognizing potential hazards and avoiding them (definition of skilled personsin accordance with VDE015 or IEC364)