Parker HLR070 Mounting Instructions

Contents

Parker HLR070 Mounting Instructions Manual pdf 9 page image

Parker EME For Safety Use192-510201N1 HLR 2019-04 9 Persons who have a knowledge of first-aid techniques and the local emergencyrescue services. Persons who have read and will observe the safety instructions.Instructions for Special HazardsThe linear module must be fixed or supported in accordance with the indicationsin this manual.The operator must ensure that operation of the linear module does not cause anydanger.If the linear module moves in hazardous areas, these areas must be safeguardedwith safety transmitter switches.1.5.4. Safety Instructions for the Company Using the SystemSupervisors must also become familiar with the entire chapter entitled "Safety"and handling required on the linear actuator.Supervisors must ensure that installation and operating personnel have read andunderstand the chapter entitled "Safety" and the description of how to work withthe machine, and that they observe the instructions.The manual must be available close to the linear module during the performanceof all tasks.It is impermissible to operate the liner module if it is not in perfectly functionalcondition.Depending on the application, the operating company must provide for a suitableseparating safety fence. Access to the motion range during operation must beprevented.The user must make sure that the work area is protected by appropriate safetydevices.1.5.5. Safety Instructions for Operating PersonnelAny work step that has a negative effect on the operating safety of the linearmotor module must be omitted.Operating and supervisory personnel are required to check the linear actuator ormachine at least once per shift for externally visible damage or defects. Changesthat have occurred (including the operating behavior) that could have a negativeeffect on the operating safety must be reported immediately.Components and accessories are designed especially for this product. Whenpurchasing spare and wear parts, use only original Parker parts. We explicitlydraw your attention to the fact that we are unable to check or release spare partsor accessories that were not provided by us. Installing and/or using such productsmay cause negative changes in the required design properties in somecircumstances, which in turn could negatively effect the active and/or passiveoperating safety of the product.The manufacturer is unable to accept any liability for damage caused by usingnon-original parts and accessories.Depending on the operating conditions (rotation speed, load, etc.) increasedsurface temperature in the area of the drive may occur. When touching it duringoperation slight injuries from burning may occur. Don't touch the product duringoperation. At maintenance, service and repair always take care that the product iscooled off before starting work.Safety and protection devices are strictly NOT to be removed or bypassed or setout of order.Applicable requirements and national accident prevention regulations mustalways be observed when installing and operating our linear motor module.