Parker SciLog FilterTec Plus Installation, Operation & Maintenance Instructions Manual

Contents

Parker SciLog FilterTec Plus Installation, Operation & Maintenance Instructions Manual Manual pdf 46 page image

46An Ohaus Adventurer Pro AV8101 scale is normally sent with the system whenpurchased. If a different scale is required, please contact Parker Technical Support forconfiguration information.5.11 Ohaus Adventurer Pro Balance Parameters:Press and hold the Menu button until MENU appears on the display. Release this button, andnow use the Yes, No, and Back buttons to navigate the Sub-menus. Press the Tare button toexit the menu.Please set the following Menu Items, all others are left at their factory defaults:ReadOutAutoZero OffFilter LowPrint-1OutputWhenstable OffAutoPrint OffContentNum Only OffHeader OffGross OffNet OffTare OffReference OffResult OnGLP OffLayoutLine Format MultiRS232-1Baud 9600Parity 7 No ParityHandshake OffIn the Setup Mode, Scale Manuf., select “OHAUS3”. By making this selection, the FilterTec Pluswill implement the correct parameters for communicating with the Adventurer Pro Seriesbalance. You will also need Parker P/N 080-067PGS, Balance Cable. (Note: The 080-066Parker Ohaus Balance cable will not work with this balance series.)NOTE: The Scale Communication settings for the updated (have the blue buttons with whitetext) FilterTec Plus and FilterTec Plus Plus have returned to match the settings used by all otherParker bench top systems. They no longer require continuous output.