Parker SciLog FilterTec Plus Installation, Operation & Maintenance Instructions Manual

Contents

Parker SciLog FilterTec Plus Installation, Operation & Maintenance Instructions Manual Manual pdf 49 page image

495.4 Setup: EthernetEthernet allows setting of the IP Address, Subnet Mask and Gateway for the FilterTec Plus.This allows communicating with the FilterTec Plus via Modbus TCP/IP when it becomesavailable. Initially, if set properly for the company network, the user can ping the unit from acommand prompt. Consult the company Network Administrator for the proper settings. Acrossover cable can be used if connected directly to a PC, otherwise use a standard networkpatch cable and a hub or switch. IP Address: The default IP Address for the FilterTec Plus is 192.168.0.191. Use ADDR1through ADDR4 to modify this address. Subnet Mask: The default Subnet Mask is 255.255.255.0. Use MASK1 through Mask4 tomodify this address. Gateway: The default Gateway is 192.168.0.1. Use GATE1 through GATE4 to modify thisaddress.- SETUP - ETHERNETUP DOWN SELECTETHERNET: ADDR1UP DOWN SELECTSELECTETHERNET ADDR1: 192INCR DECR SELECTETHERNET: ADDR2UP DOWN SELECTETHERNET ADDR1: 168INCR DECR SELECTETHERNET: ADDR3UP DOWN SELECTETHERNET ADDR1: 0INCR DECR SELECTETHERNET: ADDR4UP DOWN SELECTETHERNET ADDR1: 191INCR DECR SELECTETHERNET: MASK1UP DOWN SELECTETHERNET MASK1: 255INCR DECR SELECTETHERNET: MASK2UP DOWN SELECTETHERNET MASK2: 255INCR DECR SELECTETHERNET: MASK3UP DOWN SELECTETHERNET MASK3: 255INCR DECR SELECTETHERNET: MASK4UP DOWN SELECTETHERNET MASK4: 0INCR DECR SELECTETHERNET: GATE1UP DOWN SELECTETHERNET GATE1: 192INCR DECR SELECTETHERNET: GATE2UP DOWN SELECTETHERNET GATE2: 168INCR DECR SELECTETHERNET: GATE3UP DOWN SELECTETHERNET GATE3: 0INCR DECR SELECTETHERNET: GATE4UP DOWN SELECTETHERNET GATE4: 1INCR DECR SELECTUPUPUPUPUPUPUPUPUPUPUP