Font and EmulationCards6-11Printer Options11 Replace the duplexing slot-cover, and reinstall the twoscrews that were holding it in place.12 Replace the paper cassettes.13 Plug in the power cord, turn both power switches on, andcheck the control panel to make sure the printer is ready toprint.The message window should read IDLE.Font and Emulation CardsThe two slots on the front, right side of the printer, below the bottompaper tray, may be used to expand the font and/or emulation capabili-ties of your printer. Both slots accept optional font, emulation, andsecurity cards. Optional emulations may require additional RAM tooperate properly. Contact your QMS vendor for font and emulationavailability for your printer.O Caution: Your printer supports only QMS PCMCIA cards. These cards are notbackward compatible with previously released QMS printers, and cards forprevious printers are not compatible with your printer.The printer supports up to two cards at once. Follow these steps toinstall a card:
