Printer Engine FeaturesQMS 1725E Print System Reference4-54Printer Engine FeaturesThrough the Administration/Engine menu you can set print engine-related parameters.Adjusting the Image AlignmentThis option allows you to adjust the horizontal and vertical placementof printed images.To check image alignment, print a standard status page (Administra-tion/Special Pages/Print Status). When the printer is placing imagesproperly, the alignment angle bar in the lower-left corner of the statuspage is 0.5"/12.7 mm from the left and bottom edges of the page. Ifthe angle bar is off, use the Administration/Engine/Image Alignmentoption to align the image horizontally and vertically in pixel incre-ments (1/300" or 0.08 mm).» Note: Engine constraints may limit the accuracy of pixel alignment.Notes If disk swapping is enabled and the hard disk is removed or notturned on, the printer does not automatically reset to thefactory defaults. It assumes there was an error and allows forrecovery, such as turning on the external hard disk beforeturning on the printer.The printer must be restarted for changes to the Enable DiskSwap menu to take effect. You can either let the printer restartautomatically after you save the change and exit from theConfiguration menu, or you can wait for the change to takeeffect the next time you manually turn on the printer.
