Emulations4-29Printer Configurationjob. This allows the system administrator to select alternate defaultemulations.Setting PostScript ParametersThis menu allows you to select a PostScript emulation level. This isuseful if you have files prepared in an application which is not fullycompatible with Adobe’s PostScript Level 2 page description lan-guage.Setting HP PCL5 ParametersTheQMS Crown Technical Reference (shipped on disk with yourprinter) and theHP PCL5 Emulation Technical Reference (availablefor purchase from your QMS vendor) contain more detailed informa-tion on this emulation. In addition,HP PCL5C Technical SupportNotes, available free through the QMS Bulletin Board, Q-FAX, andMenu Administration/Emulations/ESP Default EmulChoices HPGL, Lineprinter, PostScript, PCL5, CCITTDefault PCL5Notes You must turn the printer off and back on again for the changeto take effect. For more information on ESP, see chapter 5,“Additional Technical Information.”Menu Administration/Emulations/PostScript/Emulation LevelChoices Level 2—For PostScript Level 2 files and most Level 1 files.Level 1 B/W—For files that contain only black-and-whitePostScript Level 1 operators. This mode does not support thePostScript color operators; the use of color operators couldcause the print job to fail.Level 1 Color—For files that contain color PostScript Level 1operators. This mode accepts color PostScript Level 1operators and translates these commands to the appropriategrayscale. This is the recommended setting for Level 1compatibility since it contains all of the commands in Level 1 B/W and the color commands.Default Level 2
