Configuration Menu4-5Printer Configurationn Administration MenuUse this menu to maintain printer-host communication informa-tion, and for selecting and configuring printer emulations, config-uring special pages, printing engine calibration, and configuringhard disks (if installed).» Note: For information on printer-host communication using theEthernet interface or any options under the CrownNet submenu(Administration/Communications/Network 2/CrownNet), see chapter2, Printer Configuration, in the QMS CrownNet Interface SystemAdministrators Guide.n Installation MenuUse this menu to establish passwords for the Operator Controland Administration menus. This menu displays only when anoptional security card is installed.Accessing the Configuration MenuTo access the configuration menu, make sure the printer is idle (IDLEdisplays in the message window), then press the Online/Offline key totake the printer off line (the Online/Offline indicator is not lighted), andfinally press the Menu key.ExampleThe following table shows how to use control panel keys to accessthe printer configuration menu. Press the control panel keys in theorder shown. The printer responds by displaying a status message orconfiguration menu in the message window.» Note: You may need to press the Next key more than one time to advancethrough the list of options.Press thiskeyto... The messagewindow reads...Online/OfflineTurn off the Online/Offline indicator andready the printer for configuration.IDLEMenu Access the configuration menu. CONFIGURATIONOPERATOR CONTROL
