Memory Modules(SIMMs)QMS 1725E Print System Reference6-204 Replace the metal tray assembly cover using five screws tosecure.The top of the cover must be inserted in a slot above the openingand the cover must be pushed in from the bottom to align theholes.5 Replace the side panel and secure it using two screws.6 Reconnect all interface cables and the power cord and turnboth printer power switches on.Memory Modules (SIMMs)Additional printer memory on small boards called single in-line mem-ory modules, or SIMMs, allows you to download more fonts, increasethe printer's buffers (where it stores data sent from the computer),and duplex print at a higher resolution.Your printer comes standard with 8 MB RAM and can be upgradedthrough the installation of additional SIMMs (4, 8, 16, or 32 MBSIMMs) to a maximum of 64 MB. (To upgrade to 64 MB, the twoSIMM connectors would each need to contain 32 MB SIMMs, requir-ing that the 8 MB SIMM that comes standard with the printer beremoved).» Note: When installing a memory upgrade, make sure the memory added isdistributed among memory clients. See the Memory submenu section inchapter 4, Printer Configuration, and chapter 5, Additional TechnicalInformation, for more information on memory distribution.Installing a SIMMIf you are replacing the 8 MB SIMM, you should first read theRemoving a SIMM section of this chapter.» Note: The following instructions are written for the system administrator.Do not attempt this procedure if you have no experience working with circuitboards.
