Intellifont SIMMQMS 1725E Print System Reference6-24Installing the Intellifont SIMMM WARNING! Turn off the printer and unplug the power cord before taking thecover off the printer.ACHTUNG! Bitte schalten Sie den Drucker aus und ziehen Sie denNetzstecker heraus bevor Sie die Druckerabdeckung öffnen.O Caution: It's very important to protect the printer tray assembly fromelectrostatic damage while performing this task.If an anti-static wrist strap is provided in your printer option kit, attachone end of it to your wrist and the other end to any convenient electricalground (for example, the bare metal chassis of equipment, as on the back ofa computer, that is plugged in but turned off). Never attach the wriststrap to any piece of equipment with an electrical current present. Turn offall power switches first. Plastic, rubber, wood, painted metal surfaces, andtelephones are not acceptable grounding points. The printer isn't anacceptable grounding point either because it must be unplugged before youperform this task.If you don't have an anti-static wrist strap, discharge your body's staticelectric charge by touching a grounded surface before you handle any printerboards or components and before removing the tray assembly cover.Redischarge your body each time after walking around and before touchingthe printer tray assembly again.1 Access the printer tray assembly.Use the instructions in the Removing the Tray Assembly, earlierin this chapter.2 Position the tray assembly so the interface panel is on yourright.3 Remove the SIMM from the anti-static bag.
