EmulationsQMS 1725E Print System Reference4-38Paper TypeIdentifies the original image’s paper size.Pen 1 - Pen 8Sets the width and color for the eight plotter pens. A width and a coloroption are available for each pen.» Note: See chapter 5, Additional Technical Information, for moreinformation on the HP-GL emulation color encoding equation.Notes Setting this option to On partially determines the range ofplotter units for a selected media type. When the plottersenses the media type, it automatically sets the hard clip limitsto 0.591"/15 mm on three sides and to 1.537"/39 mm on thefourth side. However, if Expand Mode is set to On, then thelimits are set to 0.197"/5 mm on three sides and 1.143"/29 mmon the fourth side.The HP-GL emulation senses the media size when the PaperType is set to Scale to Paper or when it is set to a particularmedia size through the control panel or through a QMSDocument Option Command.Menu Administration/Emulations/HPGL/Paper TypeChoices Scale to Paper, A (letter/8.5"x11.0"), A4 (210x297 mm), B(11.0"x17.0"), A3 (297x420 mm)Default Scale to PaperMenu Administration/Emulations/HPGL/Penx/WidthChoices 00-60 (0.1-6.0 mm)
