WARNING!Do not allow vehicles to touch each other asthis could establish a ground connection andpersonal injury could result.Jump-Starting ProcedureWARNING!Failure to follow this jump-starting procedurecould result in personal injury or propertydamage due to battery explosion.CAUTION!Failure to follow these procedures could re-sult in damage to the charging system of thebooster vehicle or the discharged vehicle.Connecting The Jumper Cables1. Connect the positive (+) end of the jumpercable to the positive (+) post of the dis-charged vehicle.NOTE:Do not jump off fuses. Only jump directly offpositive post.2. Connect the opposite end of the positive (+)jumper cable to the positive (+) post of thebooster battery.3. Connect the negative (-) end of the jumpercable to the negative (-) post of the boosterbattery.4. Connect the opposite end of the negative (-)jumper cable to a good engine ground (ex-posed metal part of the discharged vehicle’sengine) away from the battery and the fuelinjection system.WARNING!Do not connect the jumper cable to thenegative (-) post of the discharged battery.The resulting electrical spark could causethe battery to explode and could result inpersonal injury. Only use the specific groundpoint, do not use any other exposed metalparts.5. Start the engine in the vehicle that has thebooster battery, let the engine idle a fewminutes, and then start the engine in thevehicle with the discharged battery.CAUTION!Do not connect jumper cable to any of thefuses on the positive battery terminal. Theresulting electrical current will blow the fuse.410
