RCA HD56W41 User Manual

Also see for HD56W41: Technical specifications

Contents

Using the TV’s Features56 Chapter 3Channel 2, 3 or 4 Antenna A Component is connected to the ANTENNA A jack on the back ofthe TV, and you want the TV to tune to channel 2, 3, or 4 when you press the correspondingbutton on the remote. Reminder: make sure the component’s Channel 2/3 or 3/4 switch is set tomatch the channel you choose in Auto Tuning.Channel 2, 3 or 4 Antenna B Component is connected to the ANTENNA B jack on the back ofthe TV, and you want the TV to tune to channel 2, 3, or 4 when you press the correspondingbutton on the remote. Reminder: make sure the component’s Channel 2/3 or 3/4 switch is set tomatch the channel you choose in Auto Tuning.Front Input Component is connected to the S-VIDEO IN or VIDEO IN jack on the front of the TV andyou want the TV to tune to the front Video Input Channel when you press the corresponding button.Input 1, Input 2 Component is connected to a VIDEO or S-Video jack on the back of the TV andyou want the TV to tune to the Video Input Channel when you press the corresponding button.Input 3, Input 4 Compatible component video source, such as a DVD player or satellitereceiver, is connected to the composite/component VIDEO INPUT jacks (Y•Pb•Pr) on the back ofthe TV and you want the TV to tune to the composite/component video input when you press thecorresponding button.Input 5 Component is connected to the DVI-HDTV jack on the back of the TV and you want theTV to tune to this input when you press the corresponding button.DTVLink 1394 components connected to the DTVLink jacks on the back of the TV can also beautotuned.PIP (Picture-in-Picture) OperationThe PIP (Picture-In-Picture) feature lets you display a second, smaller analog (NTSC format)picture on top of the main analog picture. The main and PIP channels must be from the sameantenna A or B; you cannot have the main picture from Antenna A and the PIP picture fromAntenna B. However, inputs can use PIP regardless if Antenna A or B is used for the main or PIPpicture. You will only be able to use the PIP window and main picture with analog channels.PIP ButtonsThere are certain remote buttons that control the way the PIP windowworks:PIP Brings up the PIP window. Press PIP again to remove the window.Arrows Let you move the PIP window to different areas of the screen.SWAP Switches the video from the PIP window to the main picture.FREEZE Freezes entire screen, including the main picture and PIPwindow, if PIP is displayed. Does not support all inputs.CH CTRL (Channel Control) Lets you switch channel control betweenthe PIP window and the main picture. To determine whether you arecontrolling the PIP or the main picture, look at the channel banner as youchange channels or press INFO button. The triangular indicator ( ) besidethe channel number lets you know which picture you’re controlling withchannel up/down, number buttons, etc.TipIf you want to go directly to an input or channel in PIP(or main), set up auto tuning and press the componentbutton.Arrow buttonsPIP buttons CH. CTRLPIP SWAP SKIPLIGHTVCR PLUS+FREEZESOUNDCLEAR MENUFORMAT INFOOKGUIDE