RCA HD56W41 User Manual

Also see for HD56W41: Technical specifications

Contents

66 Chapter 4Using the TV’s Menu SystemSVMSVM stands for Scan Velocity Modulation. This feature improves the sharpness ofthe picture. It sharpens the black-to-white edges and white-to-black edges.Reset Controls9Film Mode8SVMSVM7Convergence6Noise Reduction5Color Warmth4Auto Color3Picture Presets2Picture Settings1Go Back0Main Menu Picture QualityPress or to point to an option, then press OK to selectit. Press to return to the menu.SVM stands for Scan Velocity Modulation.SVM improves the sharpness of the picture by sharpeningthe black-to-white edges and white-to-black edges.Some users may prefer the TV's picture when SVM is off.A change in this screen is applied to all inputs.SVM OffSVM OnReseReset Controls9Film Mode8SVM7Convergence6Noise Reduction5Color Warmth4Auto Color3Picture Presets2Picture Settings1Go Back0Main Menu Picture QualityPress OK to reset all Picture Quality menu items to theoriginal factory settings.Reset Controls will change all Picture Quality settingsback to their initial values (except for Convergencesettings).The settings for digital source inputs (Input 5,digital-TV, DTVLink) operate and are reset as one.The settings for analog-TV from both antennasoperate and are reset as one. Inputs 1-4and the Front Input operate and are reset independently.SVM and Film Mode apply to all inputs and are resetacross all inputs.Select "Reset" to continue or select "Cancel".CancelResetWeb Browser9Assisted Setup8Preferences7Connections6Parental Controls5Time4AudioAudio3Picture Quality2GUIDE Plus+ Menu1Go Back0Main MenuPress OK orto access the Audio menu.•Equalizer Presets: Select a preset or adjust the equalizer.•Audio Processor: Choose the way for programs to sound.•Sound Logic: Turn it on to minimize variations in volume.•Audio Language: Select a default or a current audio track.•SAP: Turn on SAP to hear a different audio track.•Balance: Shift the audio between the left and right speakers.•Fixed/Variable Out: Choose output for an amp or receiver.•Digital Audio Out: Choose either Auto Select or PCM outputThe Audio menu has screens for setting the audio featuresand for tweaking the sound:Film ModeThe Film Mode automatically detects video sources that were originallyrecorded on film and converted to a different format. Film mode modifies theconverted signal so it looks as close as possible to the original, a process calledreverse 3:2 pulldown. Options are Advanced, On, and Off.• Advanced The default and recommended setting.• On Used in circumstances when the TV is to be used solely with film-based sources.• Off Use this setting if you think the reverse 3:2 pulldown is causingdistortions in your picture.Reset ControlsThe Reset Controls menu button resets all picture quality controls to theiroriginal factory settings (except convergence) for the currently tuned input orgroup of input sources (see on-screen text). You must choose:1. Tune to the “input” you would like to reset.2. Press MENU to access the Main Menu.3. Select Picture Quality, and then select Reset Controls to set reset the settingsfor the currently tuned input.Audio MenuThe Audio menu lets you adjust audio output. To access the Audio menu, pressMENU on the remote, and then select Audio from the main menu. The followingaudio items can be adjusted: Graphic Equalizer, Audio Processor, Sound Logic,Audio Language, SAP, Balance, Fixed/Variable Out, and Digital Audio Out.Reset Controls9Reset ControlsFilm Mode8SVM7Convergence6Noise Reduction5Color Warmth4Auto Color3Picture Presets2Picture Settings1Go Back0Main Menu Picture QualityPress or to point to an option, then press OK to selectit. Press to return to the menu.Film Mode detects the frame rate at which a film or videosource was recorded and adjusts the picture accordingly.The Advanced setting (recommended) enables Film Modeonly when it's likely to improve movie playback quality.The On setting is intended for use with sources that areexpected to be film based (like DVDs). Film Mode is enabledmore often by the On setting than by Advanced setting.The Off setting turns off film mode upconversion andmotion adaptive deinterlacing is used on all video.OffOnAdvanced