RCA HD56W41 User Manual

Also see for HD56W41: Technical specifications

Contents

72 Chapter 4Using the TV’s Menu SystemUse the keyboard or the remote's arrow keys to enter thehost name. This may be the only setup you need to do.Reset All4Proxy Server3IP Address2Host NameHost Name1Go Back0Main Menu Connections Ethernet SetupSome Internet Service Providers (phone/cable company)may require you to provide them with your TV's EthernetMAC (Media Access Control) address and assign you with adevice host name to enter below. This is usually NOTrequired if connecting to an ISP through an Ethernetgateway device (e.g. router) supporting NAT/PAT,sometimes referred to as a DSL/Cable Modem router.This is your device's MAC address:00 11 22 33 44 55If your Ethernet gateway device supports DHCP, theDomain Name will appear here:domain.name.here.If required, enter the device hose name below:Auto TuningThis menu lets you specify the various components you have connected to yourTV. It lets you program a component button on the remote control (VCR, VCR2(AUX default), DVD, or SAT/CAB) so that pressing the button automatically turnson the TV and turns the TV to the correct Video Input Channel (see the Featureschapter on page 55 for detailed information).Note: AUX by default is set up for a second RCA VCR. Or, you can programVCR or AUX to operate a second RCA VCR with the 2001 code. Also, anyVCR programmed to the AUX button becomes “VCR2” button andcontrollable by auto tuning.1394 Setup (DTVLink®)The 1394 Setup menu consists of DTVLink Connect and 1394 Recording optionsto set up DTVLink and IEEE-1394 components to work with your TV.DTVLink Connect Some DTVLink set-top components (IEA-775 compliant)need an additional analog video connection to the TV. The screen tells youwhich component needs this connection. You then select which of the TV’sanalog inputs is used for the analog connection from the DTVLink component.Note: When a component is plugged in or unplugged, the DTVLinkConnect screen is updated automatically.1394 Recording Set up the component that can be controlled by the remoteand which will be the default recording component when you press RECORDand STOP. Only the 1394 components capable of 1394 recording will bedisplayed. See page 60 for more details.Notes: Some IEEE-1394 components supply power to other components.This TV does not supply power to other components.The TV only outputs 1394 video and audio to a component which enforcescopy-protection measures.Some components that do not support Digital Copy Protection may causeerrors on the DTVLink connection if another source that supports DigitalCopy Protected material is connected to the DTVLink.Special FeaturesInitial Channel and Initial Volume are two special features that are intended forcommercial/retail use only.Initial Channel You can select the channel that your TV tunes to each timethe TV is turned on or plugged in.Initial Volume This features works only if the Initial Channel feature is set toOn. Select the volume level that you want when the TV is turned on.Ethernet SetupIf you have a NAT (Network Address Translation)/PAT (Port Address Translation)component with DHCP capability (router, etc.), no setup is required. The TVautomatically sets itself up for Ethernet use. If you do not have a NAT/PATrouter, you may need to establish some settings in conjunction with your ISP(Internet Service Provider) before you can connect to the Internet. See Ethernetconnection on page 15 for more information.A Reset All selection is provided for your convenience if you move the TV toanother city and must enter new information, or enter some incorrect information.Initial Volume2Text hereInitial Channel1Go Back0Main Menu Connections Special FeaturesPress or to point to an option, then press OK toselect it. Press to return to the menu.Select what should occur when power is restored to the TV:On: Go toOn: Go to last input or channel selectedOff: Initial Channel is disabled999Channel Sub-channel 999Antenna A (Air)Ethernet Setup9Special Features81394 Setup7Auto Tuning6Signal Type5Signal Source4Software Upgrade3Channel Search2Antenna Info1Go Back0Main Menu ConnectionsPress OK orto access the 1394 Setup menu.•DTVLink Connect: Set an analog input for a DTVLink device.•1394 Recording: Pick a device to receive remote commands.The 1394 Setup menu has screens for setting up DTV Linkand IEEE-1394 devices to work with the TV.Ethernet Setup9Special Features81394 Setup7Auto Tuning6Signal Type5Signal Source4Software Upgrade3Channel Search2Antenna Info1Go Back0Main Menu ConnectionsPress OK to select the channel or input that is tuned whenthe VCR key is pressed on the remote.Select which input or channel should be automatically tunedwhen a button listed below is pressed on the remote control.Tip: If you indicated inGUIDE Plus+ Setup thatyou have a cable box,set the Auto Tuning forSAT-CABLE to "NotConnected".SAT-CABLE (Satellite or Cable Box)Front InputDVDFront InputVCR2 (Aux default)Front InputVCRFront Input