RCA HD56W41 User Manual

Also see for HD56W41: Technical specifications

Contents

Chapter 4 67Using the TV’s Menu SystemTruSurround, SRS and (O) symbol are trademarks of SRS Labs, Inc.TruSurround technology is incorporated under license from SRS Labs, Inc.Digital Audio Out8Fixed/Variable Out7Balance6SAP5Audio Language4Sound Logic3Audio ProcessorAudio Processor2Equalizer Presets1Go Back0Main Menu AudioPress or to point to an option, then press OK toselect it. Press to return to the menu.The Audio Processor setting alters the sound of onlylvariable volume outputs but not fixed-volume outputs likethe Digital Audio Output or the Record Output.A change in this screen is applied to all inputs.SRS TruSurroundSRS FOCUSSRSStereoMonoEqualizer PresetsYou can select one of the seven-band Equalizer Presets or create your ownpersonal preset. The seven-band graphic equalizer lets you adjust the audiofrequency settings. The equalizer can only be changed if the Fixed/VariableAudio Output is set to Variable Output. If the Fixed/Variable Audio Output is setto Fixed Output, you cannot make changes to the equalizer and the bands areset to 0dB. However, the graphic equalizer levels for Variable Output are storedin memory in case you switch to Fixed Output then back to Variable Output.Notes: If the internal speakers are used as the center channel audio speakerfrom an external audio receiver, the graphic equalizer settings do not apply.Equalizer Presets are stored for each input. All other audio featuresettings are stored globally across all inputs and not per input.Audio ProcessorThe Audio Processor displays a choice list of available audio modes, whichcontrol the way the sound comes through your speakers when TV is set to usingthe Variable Output. The selected setting affects all inputs and antennas.To create the settings:1. Press the MENU button to access the main menu.2. Select Audio, and then Audio Processor. Depending on your speaker setup,any combination of the following options appear:• Mono plays the sound in monophonic audio only. This should only beused when receiving broadcasts where distance from the broadcastersmakes the stereo signal weak. The channel banner displays the word Monowhen you tune to a program that is broadcast in mono.• Stereo Splits the incoming stereo audio signal into left and right frontchannels. Most TV programs and recorded materials have stereo audio. Thechannel banner displays the word Stereo when you tune to a program thatis broadcast in stereo.• Adds greater depth and stereo separation to stereo audio signals.Delivers a panoramic 3D sound stage from stereo material.• Redirects the treble portion of the audio in the speaker system tomake dialog more understandable. Repositions and elevates the audio to thecenter of the TV.• Creates a virtual surround sound from multichannel source materialthrough any two-speaker playback system.Video Equalizer Preset SettingsDigital Audio Out8Fixed/Variable Out7Balance6SAP5Audio Language4Sound Logic3Audio Processor2Text hereEqualizer Presets1Go Back0Main Menu AudioFor each input select a different equalizer preset or create aPersonal preset with the equalizer. Press OK to continue.PersonalVideo CameraVideogameVoiceMusicMovieStandardFlat15kHz-36.3kHz-52.5kHz-101kHz-5400Hz0150Hz+360Hz+6+12 dB0 dB-12 dB