Changing the Sector Band Chapter 6RADWIN 5000 HPMP User Manual Release 3.2.00 6-35The foregoing applies to both regulated and unregulated Bands.To obtain and install additional bands:1. Make a list of ODU serial numbers for all HBSs and all HSUs to receive additionalbands. The list should be a simple text file, one serial number per line. (The serialnumbers are located on the stickers on the ODUs.)2. As Installer, open the window of Figure 6-16 above, and click Add Bands. The fol-lowing instruction panel is displayed:Figure 6-17: Add Bands Instructions PanelThe serial numbers displayed relate to the ODUs in the sector. Click Copy to Clip-board.3. This step applies only if you have additional un-installed units:Before proceeding to step 2 in Figure 6-17, open your own list in a plain text editor.If the displayed serial numbers are in the list, select your list and copy it all to theclipboard. Otherwise append the clipboard contents to your list. Select the whole listand save it to the clipboard.4. Now carry out steps 2 to 5 in Figure 6-17. Step 2 will take you to a Web page,which looks something like this:NoteThere is no connection between license fees payable to RADWIN foradditional installed Bands (a hardware feature) and license fees payable toregulatory authorities for the right to use such Bands (a legal imposition).
