Configuration with Telnet Chapter 6RADWIN 5000 HPMP User Manual Release 3.2.00 6-377. Copy and Paste the license keys into a plain text file and save it to a safe knownplace.8. Open the Configure | Operations tab (Figure 6-10). Check the License File but-ton, navigate to the file you save in the last step.9. Upon completion of the process, click Activate. The next time you enter the ChangeBands tab, the new bands will be available,Configuration with TelnetTelnet Access to the HBSA Telnet terminal can be used to configure and monitor the RADWIN 5000 HPMP.To start a Telnet session on the HBS, use telnet .For example, if you run Telnet as follows,telnet 192.168.10.200you will be asked for a user name and password.The Telnet log on user name is the password that you used to enter the RADWIN Manager(for example, the default:admin). The Telnet password is the corresponding Communitystring (default:netman).Figure 6-18: Telnet session log on to the HBSA Read-Only Community string allows you to use display commands only whereas a Read-Write Community string allows you to use display commands and execute set commands.
