HBS Events Log Chapter 4RADWIN 5000 HPMP User Manual Release 3.2.00 4-11Clicking the Activate button initiates an activation Wizard. The Activate button in the title baris hidden, leaving it looking like this:The Activation process is covered in detail in Chapter 5.At any time, the current status of the HBS is shown in the Sector Status Panel, Figure 4-10.HBS Events LogThe Events Log records system failures, loss of synchronization, loss of signal, compatibilityproblems and other fault conditions and events.Alarms (traps) are displayed in the Events Log in the lower panel of the main window. TheEvents Log may be saved as a text file.The Events Log includes the following fields:» Sequential number (ID)» Date and time stamp» Message» Trap source» IP address of the ODU that initiated alarm.For complete information about internal traps and alarms see Chapter 8.The events are displayed in the Events Log in the lower right-hand panel of the RADWINManager main window:Figure 4-12: Events Log panelThe events log provides a color coded event list. Green items (like the one in Figure 4-12)are informational. You can set the color coding for critical, cautionary and informational mes-sages from the Preferences buttonNoteThe foregoing event types include events from all links for which thismanaging computer has been defined as the traps address. Only eventsfrom RADWIN equipment will be shown.
