Rangemaster CLASSIC 110 GAS FSD User Manual

Also see for CLASSIC 110 GAS FSD: Installation and user guide User's guide & installation instructions User's guide & installation instructions

19Dear InstallerBefore you start your installation, please complete the details BELOW.If your customer has a problem relating to your installation they will be able to contact you easily.Thank youInstaller’s NameInstaller’s CompanyInstaller’s Telephone numberYou will need the following equipment to complete the cookerinstallation satisfactorilySTABILITY BRACKETIf the cooker is to besupplied with gas througha flexible hose, a stabilitybracket or chain must befitted.These are not suppliedby with the cooker but areavailable at most buildersmerchants.GAS PRESSURE TESTERIt is important the gaspressure is set correctlyFLEXIBLE GAS HOSEIMPORTANTFlexible hose must besuitable for 70°C rise whenthe supply connection isabove 610mm from thefloor.For LPG, a suitablehose for the gas type andpressure must be used.A hose is not suppliedwith the cooker.MULTIMETER(for electrical checks)Make sure the installationis electrically safe.You will also need the following tools:1. Electric drill2. Masonry drill bit & Rawlplugs(only required if fitting the cooker on a stoneor concrete floor)3. Steel tape measure4. Cross head screwdriver5. Flat head screwdriver6. Spirit level7. Pencil8. Adjustable spanner9. Screws for fitting stability bracket