SAFETY, OPERATORS & MAINTENANCE MANUALen-448 MAINTENANCE &LUBRICATION8.1 MAINTENANCE & LUBRICATION CHARTMAINTENANCE AND LUBRICATION CHARTInterval Item SectionFirst 50 hours z Change Engine Oilz Check Fan Belt Tension8.28.3Daily10 hoursz Check Engine Oil Level.z Check Safety Interlock System.z Check Engine Coolant Levelz Check Hydraulic Fluid Levelz Check Tyre Pressurez Check Rear Wheel Hub Nut Lockz Check Engine Bay for Debris8.27.28.48.54.28.118.12WeeklyEvery 50 hoursz Check for Loose Components.z Check for Hydraulic Leaks.z Check Fan Belt Tension.z Check Air Filter Tell Tail Indicator*.8.128.128.38.9Every 250hoursz Change Engine Oil & Oil Filter. 8.2End of seasonEvery 1000hoursz Check Battery Condition.z Change Engine Oil & Oil Filter.z Change Engine Air Filter Element*z Replace Fuel Filtersz Change Hydraulic Oil & Filtersz Drain & Clean Fuel Tankz Drain & Replace Engine Coolant8.98.28.98.88.58.88.4Lubricate all Grease fittings with Shell Darina R2 or equivalent Grease weeklyA = Lift Arm Pivot LH, B = Lift Arm Pivot RH, C = Stub Axle Pivot LH, D = Stub Axle Pivot RH, E =Axle Pivot Centre, F = Steering Ram Ball Joint LH, G = Steering Ram Ball Joint RH (see diagram)* Check more often in dirty conditionsIMPORTANTRefer to Engine Manufacturers Manual for Additional Engine Maintenance ProceduresFLUID REQUIREMENTSQuantity TypeA Engine Oil (with filter) 5.1 Litres 10W 30B Hydraulic Oil (with filter) 42 litres Shell Tellus 46 (ISO VG 46)Greenscare 46 (ISO 46) Bio Degradable OilC Radiator Coolant 5 litres 50% Anti-FreezeD Fuel 51 litres No 2-D (ASTM D975) Diesel