Ransomes HR3300T Safety, Operation & Maintenance Manual

Contents

Ransomes HR3300T Safety, Operation & Maintenance Manual Manual pdf 60 page image

SAFETY, OPERATORS & MAINTENANCE MANUALen-609 ADJUSTMENTS9.8 SEAT (GRAMMER MSG85)The seat can be adjusted for leg reach, back restangle and operator weight to provide a comfortableposition for operating the machine.A. FORE AND AFT ADJUSTMENTTo Adjust:The position of the adjusting lever (A) is on the righthand side of the seat below the seat cushion. Bypulling the lever up, the seat can be slid backwardsand forwards, when in the desired position releasethe lever to locate in one of the pre set positions.B. BACK REST ADJUSTMENTTo Adjust:The position of the release lever (B) is on the lefthand side of the seat. While sitting on the seat pullthe release lever upwards to release the back rest.(The back rest is spring loaded to fold onto the seatcushion.) Lean back to obtain the desired positionfor the back rest and release the lever to locate inone of the pre set positions.C. WEIGHT ADJUSTMENTTo Adjust:The position of the operator weight adjust lever (C)is on the front of the seat. To change the operatorweight sitting pull the lever out and rotate the leverwhile sitting on the seat.D. HEIGHT ADJUSTMENTTo adjust:When sitting on the seat the height can be adjustedby holding the edge of the seat cushion, pushingyour weight down and lifting as the cushion as thesuspension returns to its normal position. There arethree pr-set positions, once the highest has beenachieved the seat returns to its lowest position.NOTE:The seat is fitted with a microswitch to senseoperator presence.When the machine is fitted with an ROPS frame orROPS cab a lap belt is fitted and should be worn atall times