Chapter 8: User Management107This feature limits access to the Dominion KX II device by users in theselected group to specific IP addresses. This feature applies only to usersbelonging to a specific group, unlike the IP Access Control List featurewhich applies to all access attempts to the device, is processed first, andtakes priority. Refer to IP Access Control (on page 153) for moreinformation.Important: IP Address 127.0.0.1 is used by the Dominion KX II LocalPort. When creating an Access Control List, if 127.0.0.1 is within therange of IP Addresses that are blocked, then you will not have accessto the Dominion KX II local port.Use the IP ACL section of the Group page to add, insert, replace, anddelete IP access control rules on a group-level basis.Figure 44: Group-based IP Access Control List¾To add (append) rules:1. Type the starting IP Address in the Starting IP field.2. Type the ending IP Address in the Ending IP field.3. Select the Action from the available options: Accept. IP Addresses specifying accept are allowed access to theDominion KX II device. Drop. IP Addresses specifying drop are denied access to theDominion KX II device.4. Click Append. The rule is added to the bottom of the rules list.5. Repeat steps 1 through 4 for each rule you want to enter.¾To insert a rule:1. Type a Rule #. A Rule # is required when using the Insert command.2. Populate the Starting IP and Ending IP fields.3. Select the Action from the drop-down list.4. Click Insert. If the Rule # you just typed equals an existing Rule #, thenew rule is placed ahead of the exiting rule and all rules are moveddown in the list.
