Step 3: Configure Network Firewall Settings28Change the Keyboard Layout Code (Sun Targets)Use this procedure if you are using a DCIM-SUSB and would like thekeyboard layout changed to another language.¾To change the keyboard layout code (DCIM-SUSB only):1. Open a Text Editor window on the Sun workstation.2. Check that the NUM LOCK key is active and press the left CTRL keyand the DEL key on your keyboard. The Caps Lock LED starts toblink, indicating that the CIM is in Layout Code Change mode.The text window displays: Raritan Computer, Inc. Current keyboardlayout code = 22h (US5 UNIX).3. Type the layout code desired (for example, 31 for the Japanesekeyboard).4. Press Enter.5. Shut down the unit and power ON once again. The DCIM-SUSBperforms a reset (power cycle).6. Using MPC, type something to verify that the characters are correct.Step 3: Configure Network Firewall SettingsTo access Dominion KX II through a network firewall, your firewallmust allow communication on TCP Port 5000 or another port that youdesignate. Refer to Network Settings (on page 122) for additionalinformation about designating another discovery port.To take advantage of the DominionKX II:The firewall must allowinbound communication on:Web-access capabilities Port 443 - standard TCP port forHTTPS communicationAutomatic redirection of HTTP requests toHTTPS(i.e., so users can type the more common“http://xxx.xxx.xxx.xxx” instead of“https://xxx.xxx.xxx.xxx”)Port 80 - standard TCP port for HTTPcommunication
