Step 5: Dominion KX II Initial Configuration32Changing the Default PasswordThe Dominion KX II ships with a default password. The first time youstart the Dominion KX II you are required to change that password.¾To change the default password:1. Power ON the Dominion KX II using the power switch(es) at theback of the unit. Please wait for the Dominion KX II unit to boot. (Abeep signals that the boot is complete.)2. Once the unit has booted, the KX II Local Console is visible on themonitor attached to the Dominion KX II local port. Type the defaultusername (admin) and password (raritan) and click Login. TheChange Password screen is displayed.3. Type your old password (raritan) in the Old Password field.4. Type a new password in the New Password field; retype the newpassword in the Confirm New Password field. Passwords can be upto 64 characters in length and can consist of English alphanumericcharacters and the special characters identified in the table followingthese steps.5. Click Apply.6. You will receive confirmation that the password was successfullychanged. Click OK. The Port Access page is displayed.Note: The default password can also be changed from the Raritan Multi-Platform Client (MPC). For more information, refer to the Raritan Multi-Platform Client (MPC) and Raritan Remote Client (RRC) User Guide.Valid Special CharactersCharacter Description Character Description! Exclamation point : Colon" Double quote ; Semi-colon# Pound sign = Equal sign$ Dollar sign > Greater than sign% Percent sign ? Question mark& Ampersand @ At sign' Single quote [ Left bracket( Left parenthesis \ Backward slash
