Port Action Menu603. Select Connect. A Virtual KVM Client (on page 64) window opens tothe target server connected to that port.Port Action Menu1. When you click on a Port Name in the Port Access list, the PortAction menu is displayed. Please note that only options available forthe selected port are listed in the Port Action menu: Connect. Creates a new connection to the target server. For theKX II Remote Console, a new Virtual KVM Client (on page 64)window is opened. For the KX II Local Console, the displayswitches to the target server and switches away from the localuser interface. On the local port, the KX II Local Consoleinterface must be visible in order to perform the switch.Note: This option is not available from the KX II Remote Console foran available port if all connections are busy. Switch From. Switches from an existing connection to theselected port (target server). This menu item is available forevery opened connection (up to a maximum of four for unitswith 4 remote users; maximum of two for units with 2 remoteusers; maximum of 1 for units with 1 remote user); this option isvisible only when one or more Virtual KVM Clients are opened.Note: This menu item is not available on the KX II Local Console. Disconnect. Disconnects this port and closes the Virtual KVMClient window for this target server. This menu item is availableonly when the port status is up and connected, or up and busy.Note: This menu item is not available on the KX II Local Console; theonly way to disconnect from the switched target in the Local Consoleis to use the hotkey (see "Hotkeys" on page 181). Power On. Powers on the target server through the associatedoutlet. This option is visible only when there is one or morepower associations to this target, when the target is off (portstatus is down), and when user has permission to operate thisservice. Power Off. Powers off the target server through the associatedoutlets. This option is visible only when there is one or morepower associations to this target, when the target power is on(port status is up), and when user has permission to operate thisservice.
