Chapter 5: Accessing Target Servers61 Power Cycle. Power cycles the target server through theassociated outlets. This option is visible only when there is apower association (one or more) to this target and when the userhas permission to operate this service.2. Select the desired menu option for that port to execute it.Switching between Target ServersWith the Dominion KX II, you can access several target servers.Dominion KX II provides the ability to switch from one target server toanother.Note: This feature is available in the Dominion KX II Remote Console only.¾To switch between target servers:1. While already using a target server, access the Dominion KX II PortAccess page.2. Click the Port Name of the target you want to access now. The PortAction Menu is displayed.3. Select the Switch From option from the Port Action Menu. TheVirtual KVM Client (on page 64) window switches to the new targetserver you selected.Disconnecting Target ServersNote: This item is not available on the KX II Local Console; the only way todisconnect from the switched target in the Local Console is to use the hotkey(see "Hotkeys" on page 181).¾To disconnect a target server:1. Click the Port Name of the target you want to disconnect. The PortAction Menu is displayed.2. Select the Disconnect option from the Port Action Menu. The VirtualKVM Client (on page 64) window closes the target window.Tip: You can also close the Virtual KVM Client window by selectingConnection > Exit from the Virtual KVM menu.
