145In This ChapterNetwork Settings ...................................................................................145Device Services .....................................................................................150Configuring Modem Settings .................................................................158Configuring Date/Time Settings ............................................................159Event Management ...............................................................................160Power Supply Setup ..............................................................................167Configuring Ports ...................................................................................168Connect and Disconnect Scripts ...........................................................206Port Group Management .......................................................................211Changing the Default GUI Language Setting ........................................211Network SettingsUse the Network Settings page to customize the network configuration(for example, the IP address, discovery port, and LAN interfaceparameters) for your KX II.There are two options available to set up your IP configuration: None (default) - This is the recommended option (static IP). Sincethe KX II is part of your network infrastructure, you most likely do notwant its IP address to change frequently. This option allows you toset the network parameters. DHCP - With this option, the IP address is automatically assigned bya DHCP server.To change the network configuration:1. Choose Device Settings > Network. The Network Settings pageopens.2. Update the Network Basic Settings. See Network Basic Settings(on page 146).3. Update the LAN Interface Settings. See LAN Interface Settings (onpage 148).4. Click OK to set these configurations. If your changes requirerebooting the device, a reboot message appears.To reset to factory defaults: Click Reset to Defaults.Chapter 8 Device Management
