Chapter 8: Device Management1603. To adjust for daylight savings time, check the "Adjust for daylightsavings time" checkbox.4. Choose the method you would like to use to set the date and time: User Specified Time - Choose this option to input the date andtime manually. For the User Specified Time option, enter thedate and time. For the time, use the hh:mm format (using a 24-hour clock). Synchronize with NTP Server - Choose this option to synchronizethe date and time with the Network Time Protocol (NTP) Server.5. For the Synchronize with NTP Server option:a. Enter the IP address of the Primary Time server.b. Enter the IP address of the Secondary Time server. OptionalClick OK.Event ManagementThe KX II Event Management feature allows you enable and disable thedistribution of system events to SNMP Managers, the Syslog and theaudit log. These events are categorized, and for each event you candetermine whether you want the event sent to one or severaldestinations.Configuring Event Management - SettingsSNMP ConfigurationSimple Network Management Protocol (SNMP) is a protocol governingnetwork management and the monitoring of network devices and theirfunctions. The KX II offers SNMP Agent support through EventManagement.To configure SNMP (enable SNMP logging):1. Choose Device Settings > Event Management - Settings. The EventManagement - Settings page opens.2. Select SNMP Logging Enabled. This enables the remaining SNMPfields.3. In the Name, Contact, and Location fields, type the SNMP agent'sname (that is, the device's name) as it appears in the KX II Consoleinterface, a contact name related to this device, and where theDominion device is physically located.
