14In This ChapterOverview ..................................................................................................14Default Login Information ........................................................................14Getting Started ........................................................................................15OverviewThis section provides a brief overview of the installation process. Eachstep is further detailed in the remaining sections of this chapter.To install and configure the KX II: Step 1: Configure KVM Target Servers (on page 15) Step 2: Configure Network Firewall Settings (on page 27) Step 3: Connect the Equipment (on page 28) Step 4: Configure the KX II (on page 31) Step 5: Launch the KX II Remote Console (on page 37) Step 6: Configure the Keyboard Language (Optional) (on page39) Step 7: Configure Tiering (Optional) (on page 40)Also included in this section is the default login information you will need.Specifically, the default IP address, user name, and password. SeeDefault Login Information (on page 14).Default Login InformationDefault ValueUser name The default user name is admin. This user hasadministrative privileges.Password The default password is raritan.Passwords are case sensitive and must be entered in theexact case combination in which they were created. Forexample, the default password raritan must be enteredentirely in lowercase letters.The first time you start the KX II, you are required tochange the default password.IP address The KX II ships with the default IP address of192.168.0.192.Chapter 2 Installation and Configuration
