Chapter 3: Working with Target Servers82b. Select Enable Scale Video to automatically scale the display onthe target server when it is accessed.c. Select Pin Menu Toolbar if you want the toolbar to remain visibleon the target when it is in Full Screen mode. By default, while thetarget is in Full Screen mode, the menu is only visible when youhover your mouse along the top of the screen.3. Click OK.Scan SettingsThe KX II provides a port scanning feature that searches for selectedtargets and displays them in a slide show view, allowing you to monitorup to 32 targets at one time. You can connect to targets or focus on aspecific target as needed. Scans can include standard targets, bladeservers, tiered Dominion devices, and KVM switch ports. See ScanningPorts (on page 50). Use the Scan Settings tab to customize the scaninterval and default display options.To set scan settings:1. Click Tools > Options. The Options dialog appears.2. Select the Scan Settings tab.3. In the "Display Interval (10-255 sec):" field, specify the number ofseconds you want the target that is in focus to display in the center ofthe Port Scan window.4. In the "Interval Between Ports (10 - 255 sec):" field, specify theinterval at which the device should pause between ports.5. In the Display section, change the default display options for thethumbnail size and split orientation of the Port Scan window.6. Click OK.View OptionsView ToolbarYou can use the Virtual KVM client with or without the toolbar display.To toggle the display of the toolbar (on and off): Choose View > View Toolbar.
