Chapter 2: Installation and Configuration39Step 6: Configure the Keyboard Language (Optional)Note: This step is not required if you are using the US/Internationallanguage keyboard.If you are using a non-US language, the keyboard has to be configuredfor the appropriate language. In addition, the keyboard language for theclient machine and the KVM target servers has to match.Consult the documentation for your operating system for additionalinformation about changing the keyboard layout.Changing the Keyboard Layout Code (Sun Targets)Use this procedure if you are using a DCIM-SUSB and would like thekeyboard layout changed to another language.To change the keyboard layout code (DCIM-SUSB only):1. Open a Text Editor window on the Sun™ workstation.2. Check that the Num Lock key is active and press the left Ctrl key andthe Del key on your keyboard. The Caps Lock light starts to blink,indicating that the CIM is in Layout Code Change mode. The textwindow displays: Raritan Computer, Inc. Currentkeyboard layout code = 22h (US5 UNIX).3. Type the layout code desired (for example, 31 for the Japanesekeyboard).4. Press Enter.5. Shut down the device and power on once again. The DCIM-SUSBperforms a reset (power cycle).6. Verify that the characters are correct.
