Chapter 1: Introduction8KX III KVM Client ApplicationsKX III works with - Active KVM Client (AKC) - Default client. Windows only.Microsoft .NET ® 4.0 (or later) is required to use KX III with theMicrosoft Windows ®-based Active KVM Client (AKC). See ActiveKVM Client (AKC) Help (on page 266) Virtual KVM Client (VKC) -Java ™ 1.7 or 1.8 is required to use theJava-based Virtual KVM Client (VKC). Java 1.8.0_40 is required touse the VKCS. See Virtual KVM Client (VKC) Help (see "VirtualKVM Client (VKC and VKCs) Help" on page 270) Standalone Virtual KVM Client - A standalone version of theJava-based Virtual KVM Client (VKC) for the Chrome browser. Java1.8.40 or later is required. See Virtual KVM Client (VKC) Help (see"Virtual KVM Client (VKC and VKCs) Help" on page 270) Mobile KVM Client (MKC) - Mobile access is provided throughMobile Access Client, which requires the use of CommandCenterSecure Gateway (CC-SG). See Mobile KVM Client (MKC) Help (onpage 319) Dominion User Station - A standalone Raritan appliance dedicated toremotely access KX III targets. All KX III models support the use ofthe User Station. See Dominion KX III User Station (on page 315).KX III Online HelpKX III online help is considered your primary help resource. PDFversions of help are a secondary resource.See the KX III Release Notes for important information on the currentrelease before you begin using the KX III.KVM Client help is provided as part of KX III online help.Online help is accompanied by the KX III Quick Setup Guide, which canbe found on the Raritan Firmware, Upgrades and Documentation page ofRaritan's website(http://www.raritan.com/support/firmware-and-documentation).The Firmware, Upgrades and Documentation page also contains a PDFversion of the end user sections of online help, including KVM Client help,Local Console Help, Remote Console Help (as applicable), specificationsand so on..Note: To use online help, Active Content must be enabled in yourbrowser.
