Chapter 4: KX III Administration249Direct Port Access and Dual Port Video GroupsDirect Port Access allows users to bypass having to use the KX III'sLogin dialog and Port Access page.This feature also provides the ability to enter a username and passworddirectly to proceed to the target, if the username and password is notcontained in the URL.If you are accessing a target that is part of a dual port video group, directport access uses the primary port to launch both the primary andsecondary ports.Direct port connections to the secondary port are denied, and usualpermission rules apply.For information on the dual port video group feature, see Creating aDual Video Port Group (on page 190).For information on direct port access, see Enabling Direct Port Accessvia URL (on page 153).Dual Port Video Groups Displayed on the Ports PageNote: The dual video primary port is defined when the port group iscreated.Note: You cannot remotely connect to the dual video port group byclicking on a primary port unless two KVM channels are available. If twochannels are not available, the Connect link is not displayed.For dual video port groups, the primary port is included in a port scan,but the secondary port is not included when connecting from a remoteclient. Both ports can be included in the scan from the Local Port.See Working with Target Servers for more information on what isdisplayed on the Ports page, and see Scanning Ports (see "ScanningPorts - Remote Console" on page 330) for information on performingscans.Updating the LDAP SchemaReturning User Group InformationUse the information in this section to return User Group information (andassist with authorization) once authentication is successful.
