Chapter 4: KX III Administration219Note: At this point, connected users are logged out, and new loginattempts are blocked.6. Click Upgrade. Please wait for the upgrade to complete. Statusinformation and progress bars are displayed during the upgrade.Upon completion of the upgrade, the appliance reboots (1 beepsounds to signal that the reboot has completed).7. As prompted, close the browser and wait approximately 5 minutesbefore logging in to the KX III again.Upgrade HistoryThe KX III provides information about upgrades performed on the KX IIIand attached CIMS.To view the upgrade history: Choose Maintenance > Upgrade History. The Upgrade History pageopens.Information is provided about the KX III upgrade(s) that have been run,the final status of the upgrade, the start and end times, and the previousand current firmware versions. Information is also provided about theCIMS, which can be obtained by clicking the show link for an upgrade.The CIM information provided is: Type - The type of CIM Port - The port where the CIM is connected User - The user who performed the upgrade IP - IP address firmware location Start Time - Start time of the upgrade End Time - end time of the upgrade Previous Version - Previous CIM firmware version Upgrade Version - Current CIM firmware version CIMs - Upgraded CIMs Result - The result of the upgrade (success or fail)Rebooting the KX IIIThe Reboot page provides a safe and controlled way to reboot your KXIII. This is the recommended method for rebooting.Important: All connections will be closed and all users will be logged off.
