Chapter 4: KX III Administration31KX III Installation and ConfigurationSee the KX III Quick Setup Guide that came with your device ordownload it from Raritan's Support website for a quick reference to thebasic, bear minimum setup steps.Additional information and optional steps included here but not in theQSG include: Additional Supported Mouse Settings (on page 34) LED Statuses During KX III Boot Up (on page 37) Connect to a VGA Monitor (Optional) (on page 38) Step 6: Configuring the Keyboard Language (Optional) (on page52)Rack MountingThe KX III can be mounted in 1U (1.75", 4.4 cm) of vertical space in astandard 19" equipment rack.Note: The Raritan device depicted in the rack mounting diagrams is forexample purposes only and may not depict your device. The mountinginstructions are specific to your device.Forward MountThe steps correspond to the numbers shown in the front rackmountdiagrams.1. Secure the cable-support bar to the back end of the side bracketsusing two of the included screws.2. Slide the KX III between the side brackets, with its rear panel facingthe cable-support bar, until its front panel is flush with the “ears” ofthe side brackets.3. Secure the KX III to the side brackets using the remaining includedscrews (three on each side).4. Mount the entire assembly in your rack, and secure the sidebrackets' ears to the rack's front rails with your own screws, bolts,cage nuts, and so on.5. When connecting cables to the rear panel of the KX III, drape themover the cable-support bar.
