Chapter 7: Virtual KVM Client (VKC and VKCs) Help280KeyboardSend Ctrl+Alt+Del MacroDue to its frequent use, a Ctrl+Alt+Delete macro is preprogrammed.Selecting Keyboard > Send Ctrl+Alt+Del, or clicking on theCtrl+Alt+Delete button in the toolbar sends this key sequence tothe server or to the KVM switch to which you are currently connected.In contrast, if you were to physically press the Ctrl+Alt+Del keys, thecommand would first be intercepted by your own PC due to the structureof the Windows operating system, instead of sending the key sequenceto the target server as intended.Send LeftAlt+Tab (Switch Between Open Windows on a TargetServer)Select Keyboard > Send LeftAlt + Tab to switch between open windowson the target server or KVM switch you are connected to.Setting CIM Keyboard/Mouse OptionsTo access the DCIM-USBG2 setup menu:1. Put the mouse focus on a window such as Note Pad (Windows ®operating system) or an equivalent.2. Select Set CIM Keyboard/Mouse options. This is the equivalent ofsending the Left-Control and Num Lock to the target. The CIM setupmenu options are then displayed.3. Set the language and mouse settings.4. Exit the menu to return to normal CIM functionality.Send Text to TargetTo use the Send Text to Target function for the macro:1. Click the Keyboard > Send Text to Target. The Send Text to Targetdialog appears.2. Enter the text you want sent to the target.Note: Non-English characters are not supported by the Send Text toTarget function.3. If the target uses a US/International keyboard layout, select the"Target system is set to the US/International keyboard layout"checkbox.
