RedMax EXZ2401S-PH-CA Operator's Manual

Contents

46Change the loop handle to the J-handle for safeoperation. (OP4)(1) Bracket : 3583-14101(2) J-handle : 6367-14200■ STARTING THE ENGINEPlease refer 5.For safe operation (P.14), 8.Operation(P.36).• The product is equipped with a centrifugal clutchmechanism, so the cutting attachment couldrotate as soon as the engine is started. Whenstarting the engine, place the product onto theground in a flat clear area and hold it firmly inplace so as to ensure that neither the cuttingpart nor the throttle come into contact with anyobstacle when the engine starts. (OP5)■ CUTTING METHODa) Use the front left side cutting.b) Guide the blade from your right to left with it tiltedslightly to your left. (OP6)c) When mowing a wide area, start working from yourleft end to avoid interference of cut grass.d) The blade may be seized by weeds if the enginespeed is too low, or the blade cuts too deep intoweeds. Adjust the engine speed and cutting depthaccording to the condition of object.• If the grass or other object gets caught in theblade, or if the unit starts to shake or vibrate,turn off the engine and check the whole unit.Change the blade if it has been damaged.• Turn off the engine and make sure the blade hascompletely stop before checking the blade, andremoving any object got caught in.WARNINGWARNINGIMPORTANTBC-EX2OP4BC-EX2OP6BC-EX2OP5BC-EX2OP78. Operation (BC-EX2 only)(Optional blade usage)English