RedMax EXZ2401S-PH-CA Operator's Manual

Contents

588. Operation (PS-EX only)EnglishAdjust the pump as follows:1. Stop the engine and make sure the stop switch is inthe OFF position.2. Place the unit on its side with the oil reservoir up.(OP2)(1) Oil tank(2) Chain coverThe oil flow adjusting screw must be pressed in slightlyin order to turn. Failure to do so could damage thepump and screw.3. With a screwdriver, push in on the oil flow rateadjusting screw and turn in the desired direction(there are three incremental settings):(a) Clockwise-decrease lubrication.(b) Counter clockwise-increase lubrication.(c) Middle• Always wear work gloves made of leather orsome other sturdy material when using thepolesaw.• Falling branches may fall onto the face or intothe eyes, resulting in injuries, scratches, andcuts, and for this reason you should always besure to wear a helmet and face protector whenusing your polesaw.WARNINGIMPORTANTPS-EXOP2