Regency City Series Owners & Installation Manual

Contents

City Series CC40EPV | 33installationOptional Framing Kit Installation CC40LE/CC40RE919-773a 01.21.19CC40LE/CC40RE FRAMING KIT INSTALLATIONThis framing kit is for the CC40LE/CC40RE. The parts are adaptable sothe same kit can be installed on either the right or left side units.NOTE: CC40RE SHOWN IN DIAGRAMSInstallation is the same for CC40LE, please note that images will appearfl ipped.Unit nailing strips are not required and can be recycled when using theframing kit.2. Begin with the unit away from the wall. Install part A to the back of theunit using holes next to appropriate shape (diamond or square dependingon which unit you have) using the diagrams below. Attach to the backof the unit using 2 screws in locations shown below.1. This framing kit requires the installation of two studs at locations shownbelow. Be sure to install studs and walls to enclose chase (see UnitManual) prior to moving the unit into position.Remove nailing flangesShown for CC40REMeasured from wall to stud centerCC40REHoles next to squares CC40LEHoles next to diamondsA 656-391B 656-3922x C 656-393D 656-396E 656-394F 656-398G 656-397H 656-395J 656-399K 656-40018"49 3/4"StudStudANOTE: CC40LE use holes corresponding with diamond shape.CC40RE use holes corresponding with square shape.walls (ie. drywall)1CITY SERIESTo watch the framing kit installation video click here http://bit.ly/2qvHIsE