Regency City Series Owners & Installation Manual

Contents

City Series CC40EPV | 9owner's informationGeneral Safety Information1. The appliance installation must conform withlocal codes or, in the absence of local codes,with the current Canadian or National GasCodes, CAN1-B149 or ANSI Z223.1 InstallationCodes.2. See general construction and assemblyinstructions. The appliance and vent should beenclosed.3. This appliance must be connected to thespecified vent and termination cap to the outsideof the building envelope. Never vent to anotherroom or inside a building. Make sure that thevent is fitted as per Venting instructions.4. Inspect the venting system annually for blockageand any signs of deterioration.5. Venting terminals shall not be recessed into awall or siding.6. Any safety glass removed for servicing mustbe replaced prior to operating the appliance.7. To prevent injury, do not allow anyone who isunfamiliar with the operation to use the fireplace.8. Wear gloves and safety glasses for protectionwhile doing required maintenance.9. Be aware of electrical wiring locations in wallsand ceilings when cutting holes for termination.10. Under no circumstances should this appliancebe modified. Parts that have to be removed forservicing should be replaced prior to operatingthis appliance.11. Installation and any repairs to this applianceshould be done by a qualified service person.A professional service person should be calledto inspect this appliance annually. Make it apractice to have all of your gas applianceschecked annually.12. Do not slam shut or strike the glass door.13. Under no circumstances should any solid fuels(wood, paper, cardboard, coal, etc.) be used inthis appliance.14. The appliance area must be kept clear andfree of combustible materials, (gases and otherflammable vapours and liquids).