Regency® P33E-4 Zero Clearance Direct Vent Gas Fireplace 45INSTALLATIONFULL SCREEN DOORS1) Before beginning the installation, remove the Glass Door from theunit. Refer to the manual for instructions.2) Slide the Bottom Faceplate Bracket into the bottom of the unit, secureit into the pins located on the inside of the fire box. Once the bracketis in place, tighten the screws into the hinges on the left and rightsides.4) a) Before attaching the Full Screen Door Frame to the unit,loosen the left and right side #8 Self Tapping Philips screwslocated on the inside top of the outer frame of the appliance.Also remove the center screw.b) Slide the cut-outs in the Top and Bottom Flange of the FullScreen Door Frame under the screw heads which wereloosened in step 4a). Once the Frame is in place, tighten thescrews to secure. Also re-secure the top center screw throughthe oblong hole.3) Before attaching the Full Screen Door Frame, remove the ScreenDoors from the Full Screen Door Frame by fully opening the doorsand lifting up off of the hinges. See important note in step 10. Cut-OutsBottomFlangeBackside of FullScreen DoorFrame ShownCut-OutTopFlangeCut-OutOblong HolePin locationBottom FaceplateBracketFull Screen DoorFrameFaceplateMountingBracketScrew
