Samsung DS 24D User Manual

Also see for DS 24D: Quick reference guide User guide User instruction

Samsung DS 24D User Manual Manual pdf 13 page image

8OUTSIDE CALLSMAKING AN OUTSIDE CALL• Lift the handset and press an idle outside line button, line group buttonor dial a line access code to receive dial tone—OR—press an idle outsideline button, line group button or dial a line access code to receive dialtone through the speaker—OR—press SPEAKER receive intercom dialtone and dial a line access code.• Dial the telephone number.• Finish the call by replacing the handset or pressing the ANS/RLS key.NOTE: You will receive No More Calls tone when you attempt to make a calland there is no key available for that line.• If Least Cost Routing is enabled on your phone system, this button maybe labeled LCR or accessed by dialling an access code (usually 0).• If your system is programmed to require an authorization code beforemaking a call, dial 4 plus a valid code before selecting a C.O. line.• If your system is programmed to require an account code before mak-ing a call, press the ACCT button or dial 47 plus a valid code, press theACCT button again and then select a C.O. line.For more information on authorization and account codes, see your systemadministrator.NOTE: If the Hot Keypad feature has been turned off, you must first lift thehandset or press the SPEAKER key before dialling.ANSWERING AN OUTSIDE CALL• Lift the handset and you are automatically connected to the ringing call.See Ring Preference under Customizing Your Keyset—OR—press theANS/RLS or SPEAKER key to automatically answer on the speaker-phone.NOTE: If a call is flashing at your keyset but not ringing, you must press theflashing button to answer.UNIVERSAL ANSWEROutside lines may be programmed to ring a general alerting device. To an-swer calls ringing this device, dial 67 or press the UA key. This device canoperate in the Day or Night mode.