Samsung DS 24D User Manual

Also see for DS 24D: Quick reference guide User guide User instruction

Samsung DS 24D User Manual Manual pdf 40 page image

35AUTO TIMERDisplay keyset users may have the timer automatically start when theyanswer incoming calls or after a short delay on an outgoing call.• With the handset on-hook, press TRSF and then dial 110.• Dial 11 to turn the auto timer on or 10 to turn it off.• Press TRSF to store your selection.TIMER FUNCTIONDisplay keyset users may use this feature as a simple stopwatch.• When the keyset is idle, press the TIMER button to start timing.• Press the TIMER button again to stop timing.• Read the elapsed time in the display.• Lift the handset and replace it. The display will return to date and time.VIEWING MESSAGE INDICATIONSYou can view all of your message indications before you return them:• With the handset on-hook, press the MSG key with the red flashing light.• The first station that left a message indication will be displayed.• Press the UP and DOWN arrows to scroll through the stations that leftmessage indications. Use the soft keys to reply, clear or advance to thenext message.• Press the ANS/RLS key to return your keyset to the idle condition.ALARM REMINDER MESSAGESWhen you use the alarm/appointment reminder feature, you create a 16character reminder message. When the alarm rings, your message will ap-pear instead of [ALARM REMINDER]. To program reminder messages:• Press TRANSFER and then dial 116.• Dial the alarm number 1 or 2.• Dial the time you want the alarm to go off. Enter the time as HHMM(hours and minutes) using the 24 hour clock.• Dial 0 (NOT SET), 1 (TODAY) or 2 (DAILY) to select the alarm type.• Write your message using the dial pad keys. Each press of a key selectsa character. Pressing the next key moves the cursor to the next position.For example, if your message is “TAKE MEDICATION,” press 8 once toget the letter “T.” Press 2 once to get “A.” Press 5 twice to get “K.” Con-tinue selecting characters from the following table to complete yourmessage.• Press the TRANSFER key to store the alarm and reminder message.• Repeat for each alarm if needed.