21NOTES:1. If the Hot Keypad feature has been turned off, you must first lift the hand-set or press the SPEAKER key before you begin dialling.2. The saved telephone number is stored in memory until you save anoth-er number.3. Redial does not apply to intercom calls.CHAIN DIALLINGYou may manually dial additional digits following a speed dial number orchain as many speed dial numbers together as required:• After the first speed number is dialled, press SPD again and dial anoth-er speed number OR manually dial additional digits following a speeddial number.AUTOMATIC REDIAL/RETRYWhen you are making an outside call and you receive a busy signal, the sys-tem can automatically redial the number for you. It will automatically redialat a pre-programmed interval for up to 15 attempts.• When you hear a busy signal, press the RETRY button.• The system will reserve the line and automatically redial the same num-ber for you. You will hear the call being made through the keyset speak-er. The microphone is muted.• When the called party answers, you must pick up the handset or pressthe ANS/RLS or SPEAKER key before you can begin speaking. Youmust answer within 10 seconds.NOTES:1. If you make another call, auto-redial is canceled.2. To cancel a retry, lift and replace the handset.PULSE TO TONE CHANGEOVERWhen making an outside call on a dial pulse line, press #. All digits dialledafter the # with be sent as tones.