23MEET ME PAGE• Lift the handset.• Press the Meet Me Page (MMPG) key or dial 54.• Dial the desired zone number.• After the attention tone, instruct the paged person to dial 56.• Press WAIT or TRANSFER.• Remain off-hook until the person dials 56 from any phone.• The paged person will be automatically connected with you.CALL PARK AND PAGEWhen you have an outside call for someone who is not at his/her desk, youcan park the call and page the requested party:• While in conversation, press the PAGE button. The call is automaticallyparked at your station.• Dial the desired page zone and announce “park” and your extensionnumber or the line number. Hang up.To retrieve a parked call:• Dial 10 plus the number that was announced. If you have a PARK key,press it and dial the number that was announced.• You will be connected to the parked call.NOTES:1. If the parked call is not retrieved within a pre-programmed period oftime, it will recall your keyset and have a slow flashing amber light. Youcannot park and page intercom calls.2. If the Hot Keypad feature has been turned off, you must first lift the hand-set or press the SPEAKER key before you begin dialling.SETTING A MESSAGE INDICATIONWhen you are calling another station and no one answers or you receive abusy signal, you can leave a message indication:• Press the MESSAGE key or dial 43 and receive confirmation tone.• Hang up. The MESSAGE key on the called station will light. Standardtelephones receive special dial tone as a message indication.NOTES:1. A station can have up to five message indications.2. If the Hot Keypad feature has been turned off, you must first lift the hand-set or press the SPEAKER key before you begin dialling.