10INTERCOM CALLSCALLING OTHER STATIONS• Dial the extension number or group number.• Wait for the party to answer. If you hear a brief tone burst instead of ring-back tone, the station you called is set for Voice Announce or AutoAnswer. Begin speaking immediately after the tone.• Finish the call by replacing the handset or pressing the ANS/RLS key.NOTES:1. If you have a DSS key assigned to an extension or station group, youmay press this key instead of dialling the number.2. If the Hot Keypad feature has been turned off, you must first lift the hand-set or press the SPEAKER key before you begin dialling.ANSWERING INTERCOM CALLS• When your keyset rings, simply lift the handset—OR—press the ANS/RLSor SPEAKER key to be connected to the calling station.• Finish the call by replacing the handset or pressing the ANS/RLS orSPEAKER key.See Ring Preference under Customizing Your Keyset.VOICE ANNOUNCE MODE(INTERCOM CALLS ONLY)When another station calls you, your keyset will sound a brief attention toneand you will hear the caller’s announcement.• Press ANS/RLS or SPEAKER to turn on the microphone and speakhandsfree—OR— lift the handset to reply.• To finish the call, replace the handset or press the ANS/RLS or SPEAK-ER key.AUTO ANSWER MODE(INTERCOM CALLS ONLY)When another station calls you, your keyset will sound a brief attention toneand then automatically answer the call.