Samsung DS 24D User Manual

Also see for DS 24D: Quick reference guide User guide User instruction

Samsung DS 24D User Manual Manual pdf 36 page image

31NOTE: Intercom calls can be automatically put on hold by pressing TRANS-FER.HEADSET OPERATIONKeyset users can switch between headset mode and handset mode. Whenusing headset mode, press the ANS/RLS key to answer and release calls.• With the handset on-hook, press TRANSFER and then dial 110.• Dial 21 to use the headset or 20 to use the handset.• Press TRANSFER to store your selection.Your keyset may be equipped with a Headset mode key. If it is so equippedpressing this key while the light is out will cause the keyset to enter headsetmode and the light will illuminate to indicate this. Pressing the key while thelight is lit will cause the keyset to return to handset mode and the light willgo out.HOT KEYPADOn your phone system your keyset’s keypad can be made “live” or “hot”so that it is not necessary to lift the handset or press the SPEAKER keybefore you begin dialling. Calls can be made and features activated by sim-ply dialling the C.O. line number, trunk group access code, intercom num-ber or feature access code. To activate this feature:• With the handset on-hook, press TRANSFER and then dial 110.• Dial 31 to turn the Hot Keypad on or 30 to turn it off.• Press TRANSFER to store your selection.KEY CONFIRMATION TONEYou can hear a short beep (confirmation tone) each time you press a buttonon the dial pad. This tone can be turned on or off.• While on-hook, press TRANSFER and then dial 110.• Dial 40 to turn tones off or 41 to turn tones on.• Press TRANSFER to store your selection.REJOINING A PAGEThis feature allows you to hear the remaining portion of an ongoing internalpage after you return your keyset to idle. To enable this feature:• With the handset on-hook, press TRANSFER and then dial 110.• Dial 51 to turn this feature on or 50 to turn it off.• Press TRANSFER to store your selection.