Connections 1255. Copy files from the PC to the memory card.Enabling USB Debugging1. Press ➔ and then tap(Settings) ➔ Applications.2. Tap the USB debugging field to verify thefeature is active before connecting your USBcable.Wi-FiAbout Wi-FiWi-Fi (short for "wireless fidelity") is a term used forcertain types of Wireless Local Area Networks(WLAN). Wi-Fi communication requires access to anexisting and accessible Wireless Access Point (WAP).These WAPs can either be Open (unsecured) aswithin most Hot Spots, or Secured (requiringknowledge of the Router name and password).Note: After you complete a connection to an active Wi-Finetwork, the Wi-Fi Calling feature will automatically beenabled.Activating Wi-FiBy default, your device’s Wi-Fi feature is turned off(deactivated). Activating Wi-Fi allows your device todiscover and connect to compatible in-range WAPs(Wireless Access Points).1. Press ➔ and then tap(Settings) ➔ Wireless and networks ➔ Wi-Fisettings.2. Tap Wi-Fi to activate the feature. A checkmarkindicates that Wi-Fi is active. The device scansfor available in-range wireless networks anddisplays them under Wi-Fi networks on thesame screen.Connecting to a Wi-Fi Network1. Press ➔ and then tap(Settings) ➔ Wireless and networks ➔ Wi-Fisettings.The network names and security settings(Open network or Secured with WEP) ofdetected Wi-Fi networks display in the Wi-Finetworks section.2. Tap the network you wish to connect to.Note: When you select an open network you are automaticallyconnected.3. Enter a wireless password (if necessary).Manually Add a New Network Connection1. Tap Add Wi-Fi network.2. Enter the Network SSID (the name of yourWireless Access Point).3. Tap the Security field and select a securityoption. This must match the current securitysetting on your target WAP.
